 Medical
Instruments
|
|
AC-112
Photoelectric Colorimeter |
|
Features |
|
- High electric
stability
A new type of silicone photo-diode brings high electric
stability that accurate measurement.
- Direct
reading of concentration
After setting the concentration
mode with standard solution, the concentration of each sample
can be read directly.
- Long
life span of lamp
The lamp has a long service life of 10,000 hours, so it
is not necessary to replace the lamp normally.
- Free
voltage
The power source regulator is stabilized at wide range of
AC from 90V to 260V.
- Both
available for spare cuvette and round cuivette
In addition to square cuvette,
round cuvette can also be used only by fitting out with an adapter.
- The
smaller sample volume
The minimum sample volume
is 1.0ml.
|
|
Specifications |
|
Detector |
Silicon Photodiode |
|
Filter |
Interchangeable glass filter
(420, 460, 510, 540, 600 nm) |
|
Light Source |
Tungsten lamp w/lens, 6V, 0.23A |
|
Display |
3 digit LED (T%/ ABS/ CONC) |
|
Range |
Transmittance |
0-110% |
T% |
|
|
Absorbance |
0-1.999 |
ABS |
|
|
Concentration |
C1 |
0-9.99 |
|
|
|
C2 |
0-99.9 |
|
|
|
C3 |
0-1999 |
|
Sample Volume |
1.0 ml (minimum) |
|
Power Requirement |
90-260VAC, 50/60Hz |
|
Dimensions |
200(W) x 95 (H) x 150 (D) mm |
|
Net Weight |
2.0 kg |
|
Standard
Accessories |
|
Square cuvette |
10 x 10 x 45 (L) mm |
|
Round cuvette |
10 (ID) x 12 (OD) x 105 (L) mm |
|
Filter set |
Glass filter, 5 kinds/set |
|
Test tube adapter |
|
|
Analog cable |
|
|
Dust cover |
|
|
Operation Manual |
|
|
|
|
Continuing research and improvements
may result in specifications change at any time. |
